• 登录 / 注册
  • Language
    • English
    • Deutsch
    • Française
    • Español
    • Português
    • Italia
    • Русский
    • 日本語
    • 한국어
    • 简体中文
    • 繁體中文
user image

What should we pay attention to the layout of all components in the circuit?

Development board
May 5, 2019 by Robin Lakhani 333

What should we pay attention to the layout of all components in the circuit?

所有评论

user image

Lucas 发表于 May 5, 2019

The core component of the functional circuit is centered and laid out around it. Components should be arranged evenly, neatly and compactly on the PCB. Minimize and shorten leads and connections between components.
0
user image

Mitra Mulia 发表于 May 5, 2019

Arrange the position of each functional circuit unit according to the flow of the circuit, so that the layout facilitates signal circulation and keeps the signal as consistent as possible.
0
user image

Ricardo E. 发表于 May 5, 2019

For circuits operating at high frequencies, the distribution parameters between components should be considered. In general, the circuit should be arranged in parallel as much as possible. This way, not only beautiful. And it is easy to load and weld. Easy to mass produce.
0
user image

Jose 发表于 May 5, 2019

The components ,which located at the edge of the board , are generally not less than 2mm from the edge of the board.
0
user image

Mike 发表于 May 5, 2019

The optimal shape of the board is rectangular. The aspect ratio is 3:2 to 4:3. When the board surface size is greater than 200x150mm. The mechanical strength of the board should be considered.
0
user image

Alex 发表于 May 5, 2019

High-frequency circuits should consider the distribution parameters between components.
0
user image

Jojo 发表于 May 5, 2019

The deepest impression is that the power cable can’t under the crystal.
0
user image

Derek 发表于 May 5, 2019

Pay attention to the processing of the signal source, and try not to cross the different power supply parts.
0

撰写答案

您需要登录后才可以回复 登录 | 注册

选择您的位置